1999 Beaver Marquis Alternator burn out
I had the alternator in my 1999 Beaver Marquis rebuilt on April 1st 2014. Once installed along with 2 new chassis batteries the voltage reading at the batteries was 14.6V. No reading was taken at th...
Forum Discussion
It sounds like it is going through a diode based isolater that has perhaps failed. Do you know if you have one of those?
If so then I would remove it from the circuit and replace it with a 100% duty cycle solenoid relay. It will last forever and there's no voltage drop across diodes.
If so then I would remove it from the circuit and replace it with a 100% duty cycle solenoid relay. It will last forever and there's no voltage drop across diodes.
