2 12 volt batterys or 2 6 volt
what gives me the most bang for my money. every other rig that I have bought always had 6 volt battery's but the new one has 2 12 volt. not sure what works better.
Forum Discussion
rjxj wrote:
What will a 1000 watt inverter run? Not a hair dryer, toaster, micro.
...
Wondering about that. Our new hair dryer has a low power setting that uses ~670W. Haven't tried it yet with our 1000W PSW inverter, but hopefully it works without blowing that expensive 75A DC fuse.
It would definitely be preferable to turning on the furnace and kneeling on the floor next to a vent, or turning on propane range and roasting my head over it (covering the flame with a cooky sheet).
I imagine the batteries will have to be well charged though, as I still only have 220AH in 2x6V GCs. The voltage drop could be substantial.
Once we get our tongue weight limitations fixed, I aim to replace those batts with a set of 4, doubling the AHs. Haven't decided on 6V or 12Vs yet, but will avoid AGMs as we're hard on batts. What with no generator, but 700W solar, they can be undercharged for days at a time when the weather/season is off. Like/need to equalize them asap afterwards. (Sadly, LiFePO4 is still too expensive for us).
Good, true deep cycle, flooded 12Vs might be the best replacements as our inverter usage seems to be increasing. Might even get a 2000W inverter some day!
