2007 okanagan 811SL slide problem
2007 okanagan 811SL truck camper. My slide out is crooked and not sealing at the top. The gap at the top is actually wider at the front than it is at the back. The bottom rear corner looks to be up...
Forum Discussion
Yes. Single rack and pinion. Got access to it today finally. It's a power gear system. One motor driving a single rail/rack.
I did find a few loose bolts and the IN stop adjustment bolt was loose and turned in where it would stop the slide from coming in far enough.
BUT......when it was leveled and pulled in I got it much better, when I brought up my Jack's and settled it back into the truck the top of the tip out came back away from the camper some, leaving a small gap.
I did find a few loose bolts and the IN stop adjustment bolt was loose and turned in where it would stop the slide from coming in far enough.
BUT......when it was leveled and pulled in I got it much better, when I brought up my Jack's and settled it back into the truck the top of the tip out came back away from the camper some, leaving a small gap.
