200a/hr LFP Load test results…
I choose not to charge my 200a/h LFP from the alternator because (say, once fully charged…) I prefer not to have it maintained at say 100% SOC…I suppose a switch would remedy this, but as primarily a ...
Forum Discussion
pianotuna wrote:
jaycocreek,
I believe LiFePo4 are excellent--so long as it is not too hot, or too cold.
As far as loading SiO2 is outstanding.
Speed of charging is not an issue for me--because I'll have either six or seven as my house bank. At .25 C that means charging at 150 amps is possible--except I have nothing that could provide that much energy.
I am not sure I would consider only being able to use 40% of rated capacity under a moderate load as 'outstanding'.
