27DCs and SG Lag Problems
Here is what I mean. Got two rebuilt 27DCs from Interstate as "Econo Power" models, which means they are whatever brand and type they decided to renew and sell at under half price. So just right fo...
Forum Discussion
lawrosa wrote:Not yet fully charged. Look for less than 1 amp per battery to call full charge.
Understood. 14.4 wins out..
So riddle me this..
I have these 12volters on the sears charger. Charging 10 amp setting @15.4 volts and 4 amps going in. SG is now at 1.250.
Its been 2 hours.
Can I conclude any information from this?
Why wouldnt the PD put in the amps @ 14.4? I know you say about the false voltage so just trying to grasp it.
PD will put in the amps at 14.4, just slower.
You can get a PD-14.8 to be a little faster. Quite frankly I like the IOTA algorithm but it does take time. Fully charging also takes time. Fully charging a battery that has been bouncing up to 90% for a week or three takes more time. Boost charge to 90% is fairly quick as you get into 14.6+ volts.
It is an electro-chemical process. Not the same as filling your gas tank or winding a spring.
