30A or 40A controller?
I’m going to mount 2 160w panels rated at 9.5 isc amps to feed 2 6v batteries…260ah. If I were to mount a 3rd panel I’m still under 30amps so a 30 amp controller should work fine….or should it. I’ve ...
Forum Discussion
For what it's worth, I installed the SC2030 and the trimetric 2030RV monitor. There are 4 x 140, 12v panels on the roof connected in parallel. Battery bank is made up of 4 x GC bats from Uncle sammy's. The 2030 set up allows me to program the charging algorithm to presets or custom.
When traveling last fall through the southwest I was running electric mattress pad, electric blanket and CPAP machine at night. Batteries charged up by noon. Sounds like you done your research now its time to get overwhelmed by information overload. Good luck.
When traveling last fall through the southwest I was running electric mattress pad, electric blanket and CPAP machine at night. Batteries charged up by noon. Sounds like you done your research now its time to get overwhelmed by information overload. Good luck.
