4@12v = 24v
I'm installing 4 -12v AGM batteries to power a 24v inverter. This is my first choice for wiring: and my second: Any pros or cons to either one?
Forum Discussion
pianotuna wrote:..which on the surface sounds like I'd be doing a lot of making sure both banks were equally charged. I'm trying to cut DOWN on the maintenance. :)
If I were in 2oldman's shoes I'd sure look at AGM 12 volt in series parallel with disconnect switches between the twin banks. Normal operating would be all four wired in a balanced manner. Switching would allow him to condition one set of batteries while using the other
