500a Shunt Question
I have one of these: https://images.search.yahoo.com/images/view;_ylt=A0LEVjqmZotU0G8A3V8PxQt.;_ylu=X3oDMTBsa3ZzMnBvBHNlYwNzYwRjb2xvA2JmMQR2dGlkAw--?p=500+amp+shunt&back=https%3A%2F%2Fsearch.yahoo....
Forum Discussion
For me it's not so much a need for a longer bolt, I just find it very awkward to work with the (upside down) bolt and lock washer, as is. It's just so much easier to place rings over a stud and then fasten things down with a nut. (I guess I'm somewhat of a spaz too, in that regard! lol)
Where I am lacking space for enough rings is on the pos terminal stud. When I switched to the heavy duty rings, I found I could barely get two battery cables and a few thin rings on the stud, and that's using a shallow nut. So now I'm considering my options for that, as well. I will need to hook up 3 heavy duty rings and at least a half a dozen thin rings.
Where I am lacking space for enough rings is on the pos terminal stud. When I switched to the heavy duty rings, I found I could barely get two battery cables and a few thin rings on the stud, and that's using a shallow nut. So now I'm considering my options for that, as well. I will need to hook up 3 heavy duty rings and at least a half a dozen thin rings.
