5mv/cell/degreeC
Theoretically my mppt solar controller is supposed to adjust the Absorb and Float set points by -5mv/cell/degreeC against a 25C standard. I have a 12V bank of 4 GC2s. So that is 6 cells? or 30mv/...
Forum Discussion
westend wrote:
What controller do you have?
Roque 3048 (now defunct).
It may be that my problem (actual measured/displayed absorb and float V exceed settings) is not the temp compensation, but the actual V calibration. Just noticed that the Rogue can be calibrated so I'll look at that next.
Thanks all for checking my caclulations.