8535 IV Atwood Hydro Flame furnace won't work
Our model 8535 IV Atwood Hydro Flame furnace has stopped working. Has power to circuit board from 12v and also has power to board from thermostat. Have propane. Hooked permanently to shore power. Conv...
Forum Discussion
This was discussed on a couple of other threads over the last month;
May want to check them out.
Essentially, you probably have corrosion on one of the connectors; Open/remove
the outside panel and disconnect/reconnect all connectors;
Seems like a lot of people have the same problem
gerry
May want to check them out.
Essentially, you probably have corrosion on one of the connectors; Open/remove
the outside panel and disconnect/reconnect all connectors;
Seems like a lot of people have the same problem
gerry
