AC motor speed controller on a MSW inverter
I want to power a 6 amp 115vac 4.5 inch angle grinder from my 800 watt MSW inverter, but have the ability to significantly slow down the rpms. I cannot justify a variac of adequate capacity, but ther...
Forum Discussion
I got the speed controller shown in the photo above.
It works great to lower the speed of my angle grinder and belt sander. The lower noise and lowered projectile dust and increased control was much appreciated. The clip on for the belt was very nice for the task in which I used it, and the dial was very nice and linear on the two power tools.
Have not tried it with the inverter. Think I'll risk the MSW 800 not the PSW400 when I do.
It works great to lower the speed of my angle grinder and belt sander. The lower noise and lowered projectile dust and increased control was much appreciated. The clip on for the belt was very nice for the task in which I used it, and the dial was very nice and linear on the two power tools.
Have not tried it with the inverter. Think I'll risk the MSW 800 not the PSW400 when I do.
