Adding a 15A breaker to PD5000 Power Distribution Panel
I am wanting to add a 15A breaker to my power distribution center. Anyone have an owner's/installation manual for the PD5000 by Progressive Dynamics, Inc? Thanks, Russ
Forum Discussion
Progressive Dynamics uses common Square D type breakers. There are two ways to add a breaker.
If you have space left (Remove cover and check) you simply get a standard breaker and place the lower "hook" on the breaker over the bar and rotate it into place TURNED OFF please.
If you have no space left you pick up a half size double breaker (two independent breakers in one housing) and remove one of the breakers (turn off first) by rotating toward you (Top is wire end) and replacing with the double half width pair, Attach one wire to each screw.
Common home type Square D breakers, nothing special.
If you have space left (Remove cover and check) you simply get a standard breaker and place the lower "hook" on the breaker over the bar and rotate it into place TURNED OFF please.
If you have no space left you pick up a half size double breaker (two independent breakers in one housing) and remove one of the breakers (turn off first) by rotating toward you (Top is wire end) and replacing with the double half width pair, Attach one wire to each screw.
Common home type Square D breakers, nothing special.
