Adding Inverter
I am thinking of adding a basic inverter to my class A rig. I just want to make a single outlet available in the kitchen. My layout will very easily allow me to connect a basic inverter to my house ba...
Forum Discussion
Sam Spade wrote:BFL13 wrote:
No, the first thing to go would be the fuse correctly sized to protect that wire. Also running the bigger load with the thinner (but properly fused) wire would cause the inverter to shut down at low voltage from the big voltage sag.
If you are going to give advice, you need to make it complete.
You said nothing about adding a fuse or changing fuse sizes.
And the voltage drop would occur at the load end of the thin wire.
The inverter end would be just fine.
Agreed. Although I did mention the fuse. You make a good point.
