Adjustable TV Mount
I have a 2007 Everest 295TS, triple slide fifth wheel. There is a small slide that is dedicated to the entertainment center and desk. The entertainment center has an opening for one of the old tube ty...
Forum Discussion
What I did was to cut a 6X6 piece of plywood. Sanded and rounded edges and stained to make it look better. Predrilled screw holes in plywood and paneling for 6 screws to mount to wall. I applied glue to the back of the plywood as added support. Then mounted the TV mount to that. You could go larger than 6X6 so you can use more screws. Also I could feel a wall stud behind the paneling and that is where the 2 screws were installed for the mount.
The plywood spreads the load to more surface.
The plywood spreads the load to more surface.
