A&E OneStep power awning motor problems
My power awning has some kind of bind in the power mechanism. All the hardware struts are fine, not twisted, bent or otherwise a problem. They all move freely. But either the motor or the tube or what...
Forum Discussion
[img]
[/img]I dont think I did this correctly. Im trying to put up a picture (actually three pictures) of my awning motor now partially unhooked from the arm. It did try to spring back up toward the trailer once I got the motor housing loose from the tube so I stopped to ask for more help before proceeding. I'll try again to get the pictures up. Again, my motor is not in the tube but at the end of the awning arm.
[/img]I dont think I did this correctly. Im trying to put up a picture (actually three pictures) of my awning motor now partially unhooked from the arm. It did try to spring back up toward the trailer once I got the motor housing loose from the tube so I stopped to ask for more help before proceeding. I'll try again to get the pictures up. Again, my motor is not in the tube but at the end of the awning arm.
