agm battery charge issue
what would cause a AGM battery to reduce its charging amperage, without the voltage reaching the set voltage cutoff in a CC mode stage of a charger example, battery is at 13.6 yet a pd9245 in boost...
Forum Discussion
LittleBill wrote:
i think you missed what i said. the voltage is not rising above 13.6 yet the amperage is tapering.
the meter output of the PD is confirmed 14.4 during this.
there are no other loads, everything is off.
You said it finally got to 14.4 at 3 amps in the OP, not being stuck at 13.6
But what was "it" ? Very confusing. Please take longer and provide a complete blow by blow on what you saw. At the converter and at the battery with meter readings vs converter settings if that comes up.
It is a mystery as it stands.
