Answered. Thanks. No Current reading on Intellitec EMS

enblethen wrote:
This may help:
Manual
From manual page 2:
If 240 VAC, 50 Amp service is available, the energy management feature is disabled and the Control Module sends a signal to the Display Module which causes the load meter to go blank, the 50 AMP service indicator to light, and all power status indicators to light

Thanks. Downloaded and saved in my Manuals file.

This may help:
Manual
From manual page 2:
If 240 VAC, 50 Amp service is available, the energy management feature is disabled and the Control Module sends a signal to the Display Module which causes the load meter to go blank, the 50 AMP service indicator to light, and all power status indicators to light

Ranger Smith wrote:
I believe if you are connected a 50 amp service it will be blank

YES! On 30A the ammeter reads correctly.

I'm so seldom connected to 50 Amps I had never notice that before. (Only had the rig since April 2008.) :S

I believe if you are connected a 50 amp service it will be blank