Any reason I should not rewire?
When I turn my battery cutoff switch to "Off", there remains a parasitic draw on the batteries from various detectors, etc. I wish to remove this draw so that I can keep the 2 12 volt batteries fully...
Forum Discussion
Thank you all for the input. It has been very helpful.
The bar is connected to the output of the switch, and thus must feed everything else in the trailer (including slides, leveler, etc which do not work unless the switch is turned to "on"). Don't have an inverter.
The bar is connected to the output of the switch, and thus must feed everything else in the trailer (including slides, leveler, etc which do not work unless the switch is turned to "on"). Don't have an inverter.
