ATS (Automatic Transfer Switch) fried?
Last time out with the fifthwheel I saw a flash out of the corner of my eye when I had the basement door open coming from the vicinity of the ATS. Everything in the trailer kept working but I can't r...
Forum Discussion
I think I found the problem and it's the ceiling fan. At the first, and only wall outlet involved there is one wire in and two wires out. When the in line was disconnected the CB did not trip. So I disconnected the first line out and reconnected the line in. The CB did not trip and I could turn on the 2 110v lights in the slide out. With the electricity disconnected I reconnected the line out at the outlet and pulled the ceiling fan down. It had one white line to the romex white line and two lines (one blue and one black) from the fan to the black line from the romex. The copper line from the romex went to the base of the fan attachment. I capped off the two romex lines and turned on the power. The CB does not trip and the lights are on. Now I think I need a replacement fan. I hope this problem is now resolved. Thank you all for the help.
