Attaching insulated bus bar to metal box
Installing Midnite Solar short bus bars like these: in aluminum breakers box - Big Baby Box from the same Midnite, like this: One bus bar is shown on the photo, and there are mounting...
Forum Discussion
Son of Norway wrote:
Screw them in from the back?
I can, but this is not how they meant it. The holes in black/red insulators are big enough to put #10 screw through, and pre-drilled holes in the box wall (they only prepped it for one bus) are pilot holes, smaller than #10.
If I screw it from the back, I would need at least #12 screws. And make sure they don't touch the metal bar.
