Attwood water heater
The 7.5amp fuse blows as soon asi turn the water heater on it does nothing the connection at the lighter connection on the circut board liiks like it got hot
Forum Discussion
Of this I am sure: It is not a burned out heating element. Here is why:
Heating element is protected by a circuit breaker, either 14 or 20 amps, it is not protected by a fuse and if it were 7.5 amps is no where near big enough since the element should draw 10-11 amps in normal operation.
Control board or short in and around it. OR short in leads to switch. Depending on where that 7.5 is.
Heating element is protected by a circuit breaker, either 14 or 20 amps, it is not protected by a fuse and if it were 7.5 amps is no where near big enough since the element should draw 10-11 amps in normal operation.
Control board or short in and around it. OR short in leads to switch. Depending on where that 7.5 is.
