attwood water heater
Hello I have an attwood water heater that won't work on gas or 110 volts. I checked the 2 amp fuse and the breaker. When you hit the gas side it dose nothing at all. Thanks for any help. Kenny
Forum Discussion
enblethen wrote:
Detail 12 shows wiring for combined LP-DSI and 120 volt water heater. 12 volts goes to the switch before water heater.Atwood manual
YES 12V DC comes from DC Dist Panel (FUSED) to switches and then goes to the circuit board (electric/white wire & gas/orange wire) then from circuit board it goes to 'thermal fuse' to normal t-stat and then back to circuit board (brown wire)
It maybe present at circuit board but IF thermal fuse is blown that is end of operation for either electric or gas.
Easy to test right at circuit board for 12V DC with either/both switches on
