Atwood Hydro Flame Furnace just quit
A few weeks ago we used our furnace(Atwood Hydro Flame)and all was fine. Last week we turned it on and it won't do anything. Have plenty of propane, thermostat is working. Have power to the circuit bo...
Forum Discussion
DO you hear it clicking trying to start up...
The control board usually trys three clicks before quitting...
Also we always burn the stove burners the first time we start up on a trip. This burns out all of any trapped air in the propane lines...
You should also hear the lower fan kick pn prior to firing the furnace flame.... There is a SAIL SWITCH the fan has to move before it will ignite the furnace... Might find that and make sure it isn't filled up with rash or something...
Most often when you hear about these not working it has to do with the battery drained down.
Roy Ken
The control board usually trys three clicks before quitting...
Also we always burn the stove burners the first time we start up on a trip. This burns out all of any trapped air in the propane lines...
You should also hear the lower fan kick pn prior to firing the furnace flame.... There is a SAIL SWITCH the fan has to move before it will ignite the furnace... Might find that and make sure it isn't filled up with rash or something...
Most often when you hear about these not working it has to do with the battery drained down.
Roy Ken
