Atwood Hydro Flame Furnace just quit
A few weeks ago we used our furnace(Atwood Hydro Flame)and all was fine. Last week we turned it on and it won't do anything. Have plenty of propane, thermostat is working. Have power to the circuit bo...
Forum Discussion
Furnace uses 12V DC power for operation
The 12V DC power can come from good charged battery when not on shore power
The 12V DC power can come from converter when connected to shore power
This is a Fault/Error Code Chart
DIAGNOSTIC CHART
FAULT *************************************** LED INDICATION
Internal Circuit Board Failure ---------- Steady on, no flashing
Limit switch/Airflow problems ----------- 1 flash with 3-second pause
Flame Sense Fault ----------------------- 2 flashes with 3-second pause
Ignition Lockout Fault ------------------ 3 flashes with 3-second pause
The 12V DC power can come from good charged battery when not on shore power
The 12V DC power can come from converter when connected to shore power
This is a Fault/Error Code Chart
DIAGNOSTIC CHART
FAULT *************************************** LED INDICATION
Internal Circuit Board Failure ---------- Steady on, no flashing
Limit switch/Airflow problems ----------- 1 flash with 3-second pause
Flame Sense Fault ----------------------- 2 flashes with 3-second pause
Ignition Lockout Fault ------------------ 3 flashes with 3-second pause
