Atwood water heater igniter, constant?
So this is my first auto-piezo-igniter water heater. When I initially turn on the igniter, it clicks real fast. Both after the pilot is lit and the burner is on, it continues to ignite (click) at ...
Forum Discussion
Bigfootford, thank you so much for the info on how it works. I had initially thought a ground pin had broken off!
I had adjusted the electrode all around before taking it off. No difference.
I've been finding that info out slowly. Atwood sent me to Camco. Camco only makes the thermocouples and pilot assemblies. Found the maker of the igniter module (Channel), and also found the part numbers on the Atwood parts list.
Electrode: 93804
Module: 93801
Harness: 93803
Now I'm waiting on a call back from Channel to see how to diagnose the electrode and module. I'll probably ust end up using it like a manual pilot model. I never drive with it on anyway.
I had adjusted the electrode all around before taking it off. No difference.
I've been finding that info out slowly. Atwood sent me to Camco. Camco only makes the thermocouples and pilot assemblies. Found the maker of the igniter module (Channel), and also found the part numbers on the Atwood parts list.
Electrode: 93804
Module: 93801
Harness: 93803
Now I'm waiting on a call back from Channel to see how to diagnose the electrode and module. I'll probably ust end up using it like a manual pilot model. I never drive with it on anyway.
