Atwood water heater igniter, constant?
So this is my first auto-piezo-igniter water heater. When I initially turn on the igniter, it clicks real fast. Both after the pilot is lit and the burner is on, it continues to ignite (click) at ...
Forum Discussion
Cleaned up all grounds, from the module wiring, to the electrode/pilot/burner mounting. REALLY cleaned the tip of the electrode. Also smacking the module did nothing. :D
the Atwood p/n for the electrode is 93804. Not available from Atwood, Channel ( the manufacturer), or in the parts system from my local dealer. The manufacturer couldn't even tell me how to test the electrode probe.
Guess It's a manual relight now. Waste of a few hours, too.
Thanks all for your help, Jim.
the Atwood p/n for the electrode is 93804. Not available from Atwood, Channel ( the manufacturer), or in the parts system from my local dealer. The manufacturer couldn't even tell me how to test the electrode probe.
Guess It's a manual relight now. Waste of a few hours, too.
Thanks all for your help, Jim.
