Forum Discussion
Kelvininin
May 29, 2015Explorer
Old-Biscuit wrote:
Main flame generates a milivot signal (flame ionization) that 'proves' main flame.
Signal goes back to circuit board via spark electrode/high tension wire.
I would be checking for 'trace'....cracks in ceramic allowing signal to go to ground.
Also check the resistance on solenoids.......roughly 40 ohms
The controller works fine. This issues is not related to the controller.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,189 PostsLatest Activity: Jan 21, 2025