Backup camera has no power

I'd go to audio shop.

My nephew works in an audio shop that works exclusively installing gps, audio, alarms, etc on new and used car dealerships as well as on friends and family's car's systems and can pin point the problem right away.

The back up camera should only have power when the RV is in reverse.

Or it could be wired into the running lights.

We have a rocker switch on the front panel that lets us turn on the camera whenever we want. We've checked the power coming from the switch and it has power from there, also has power in the front running to the back, so SOMEWHERE between the front and the back, it's broken, unplugged, etc. It's a 41 foot Newmar Dutch Star, and 41 feet is a lot to try to fish wires through.

Have you called the previous owner for some help?

Haven't contacted the previous owner. We've had the coach since 2013 and didn't have any contact info for them, unfortunately.

Do you have an owners manual for the backup system? What make & model is the system?

corvettekent wrote:
The back up camera should only have power when the RV is in reverse.

Just an FYI. This is not necessarily correct. Some can be wired to always be on, not just in reverse. In fact, mine is wired so the monitor comes on automatically when I start the engine. 95% of the time I leave the monitor on to serve as my rear view mirror while driving down the highway.

Camera is a Power Acoustik. It's hooked into a Kenwood GPS/radio/video system. We THINK the previous owner had the original monitor and radio replaced with the Kenwood unit and they also put in a new camera. They probably just did the quickest thing they could to hook it up. Unfortunately, that leaves us in the dark - literally. It's been working for the last 7 years and suddenly quits. REALLY thought it was just the camera, but after a lot of testing, we're seeing that the camera isn't getting any power to it even though there seems to be power running from the front of the rv.

Sorry Dunninn....

An issue like this is going to be near impossible to trouble shoot on this forum.

Bill