Bad wind noise from truck door
Had my 2006 GMC 2500HD over 11 years. Have been sporadic times when wind noise from driver's door was very bad over about 50 mph. Could eliminate most of it by wiping door edge and rubber strip with...
Forum Discussion
Ramblin' Ralph wrote:
Thanks for all the tips!
I tried the "dollar bill" one and found that about a 6" part of the door has much less resistance than the rest. It's around the area that curves downward from horizontal to a slant.
I put a couple of layers of black electrical tape in two places on the door where I thought it would be contacting the rubber seals. Definitely increased the resistance of the bill. Will be driving to a new campground today and will report back the results when I have a Net connection.
put a strip of duct tape along the windshield pillar on the outside covering the pillar to the glass on the windshield. if this reduces or stops the noise, then at least part of the issue is the issue I pointed to on a previous post that is covered by a TSB.
