Batteries--Changing from 2x12v to 2x6v
I'm planning on switching out my two original 12-volt batteries to two 6-volt. My question: Currently with the 12v in parallel, there are 3-4 cables hooked to the positive terminals of each battery. ...
Forum Discussion
Use an individual stud type terminal block. Roy B, offered up excellent advice. DO NOT put the terminal blocks within one foot distance to the battery or you're gonna suffer insufferable corrosion problems. MARK A B C D wires or 1 2 3 4 On each terminal block and denote with color. Krylon has paint now for plastic that sticks to cleaned-off insulation.
