theoldwizard1 wrote:
For that thickness of plywood, I would kerf the back side with a circular saw about 1 ply deep. It will take several kerfs about 2\"-4\" apart. Fasten the flat end down and SLOWLY apply pressure to bend it.
theoldwizard1 wrote:
For that thickness of plywood, I would kerf the back side with a circular saw about 1 ply deep. It will take several kerfs about 2\"-4\" apart. Fasten the flat end down and SLOWLY apply pressure to bend it.
/discussions/fifthwheelforum-board/load-range-g-tires/3274697/replies/3335187