Best fittings for water heater bypass valves?
On winterizing, I noticed the cold water valve (part of the three valve array for bypassing the WH) was leaking around the crimp clamp. Since I always use a breakage as a way to upgrade to something ...
Forum Discussion
I like PEX clamps and as you mention, the tool is expensive and needs calibration. I found cinch clamps and tool for PEX. Less pricey and works extremely well.
I would go with a 3 way valve and eliminate 2 of the existing valves. This requires a check valve at the hot water outlet.
I would go with a 3 way valve and eliminate 2 of the existing valves. This requires a check valve at the hot water outlet.
