Bypassing transfer switch
The transfer switch on my Class C "died" 3 days ago. I cannot get a new one installed for a couple of weeks. In the meantime, I have a trip planned for next week. My question is, is there a SAFE wa...
Forum Discussion
OK, here is what I just did. TELL ME IF THIS IS UNSAFE. I located the power cord wires coming into the transfer switch. I then located the wires going from the transfer switch to the breaker panel. I then connected the white to white, black to black, and copper to copper USING WIRE NUTS. I then turned on the power and everything works. The internal wiring in the switch is what was burned before, and now those wires are NOT connected to anything except the generator, which I will NOT use. Does this sound ok, especially the wire nut connection?
