Cannot run A/C while at highway speeds
This is long and I am sorry for that. But describing the setup and problem is necessary. Here is my situation. First of all, this is a 2005 Hitchhiker II 32.5 UKTG fifth wheel. I have built a ge...
Forum Discussion
I really do appreciate everyone's suggestions. We just returned from a month in Wyoming and during the two days it took to get back, the temperatures in the trailer climbed into the 90s each day. The ability to cool it down prior to stopping for the evening would have been tremendously helpful.
That being said, we do not have any trips planned that will cause us to be out overnight on the road until next summer (we're not yet retired). As such, I plan to work on this over the next few weeks. However, it's close to 100 today in Dallas and only going to get worse.
The point of all of this is that I hate it when people come to these boards and ask questions, get good answers and then never come back with how they resolved their problem. I promise not to do that. But I am going to be stepping away from this thread for a while until I have a chance to work on the trailer again in the next few weeks. For those that have an interest in the outcome, I promise, I will update this thread with the results of my testing. If that testing results in a solution, I'll let everyone know that, too. Either way, I think that what I am trying to do would be helpful to other DIYers who may encounter a similar situation.
Thanks again and I hope to be checking back in on this thread soon!
That being said, we do not have any trips planned that will cause us to be out overnight on the road until next summer (we're not yet retired). As such, I plan to work on this over the next few weeks. However, it's close to 100 today in Dallas and only going to get worse.
The point of all of this is that I hate it when people come to these boards and ask questions, get good answers and then never come back with how they resolved their problem. I promise not to do that. But I am going to be stepping away from this thread for a while until I have a chance to work on the trailer again in the next few weeks. For those that have an interest in the outcome, I promise, I will update this thread with the results of my testing. If that testing results in a solution, I'll let everyone know that, too. Either way, I think that what I am trying to do would be helpful to other DIYers who may encounter a similar situation.
Thanks again and I hope to be checking back in on this thread soon!
