Capacity Testing and 20 HR Rating
I'm thinking about doing a capacity test on my four GC2's. They have a 20hr rating of 215Ah. One thing I'm curious about is how the 20hr rating would have been determined. Being 6v, would they h...
Forum Discussion
BFL,
That makes sense to me. I'll try my best to take all things into account... SG, OCV, Ah countdown.
And your point about loads creeping up on inverter use rings true. I discovered the other day, my microwave does indeed draw 1080w, but the current is at 10.3a, instead of about 9, because of line loss. The kill-a-watt continues to prove itself as being a rather useful little device.
I figure a 250w/120v load should average out nicely. So, what can I use? hmmm.
That makes sense to me. I'll try my best to take all things into account... SG, OCV, Ah countdown.
And your point about loads creeping up on inverter use rings true. I discovered the other day, my microwave does indeed draw 1080w, but the current is at 10.3a, instead of about 9, because of line loss. The kill-a-watt continues to prove itself as being a rather useful little device.
I figure a 250w/120v load should average out nicely. So, what can I use? hmmm.
