Forum Discussion
BFL13
Jun 02, 2015Explorer II
With Vabs set at 14.6v, tapering starts when SOC is 72% using 103a on my 458AH bank (22% charging rate) with my PowerMax 100 amper.
With Vectors, which are programmed to begin tapering at 13.9v, 103a worth of them on the same bank has tapering start at 68% SOC, but of course they catch up with the PowerMax in the end by having their voltage continue to rise during Absorption while the PM does CV at that 14.6
With Vectors, which are programmed to begin tapering at 13.9v, 103a worth of them on the same bank has tapering start at 68% SOC, but of course they catch up with the PowerMax in the end by having their voltage continue to rise during Absorption while the PM does CV at that 14.6
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,240 PostsLatest Activity: May 01, 2025