Charging LFP battery from AC-DC unit
Tried to charge LFP from Meanwell se-200-15. Lynac Lithium 120AH battery marketed as 100AH, you discharge to 80% DOD and get 100AH. Was partially charged already, resting 13.1V. Battery manual sugg...
Forum Discussion
Almot wrote:Ah, got it. That's within the power supplies 1% tolerance. Heating up the components will cause drift as well.
When charging directly from Meanwell and voltage got stuck at 14.15, it was directly on Meanwell output terminals. I installed a small meter on the Meanwell. Not at the end of a long wire to battery.
