Cleaning Onan generator slip rings
Howdy, has any one bought that slick stick to clean the slip rings on their generator? Wondering if I can perform that operation without dropping the generator. Thanks to all who reply.
Forum Discussion
fourthclassC wrote:
Appreciate all the replies. I have not actually looked at the slip rings yet. It is a 4kwatt onan. 03 Winnebago 324v. class C. I replaced the fuel pump and filter with Onan OEM about 2 years ago. Been running and starting great since then. But recently it shuts down after about 30 mins. with the AC on. Stays running with lower draw stuff like fans going.
Usually with slip ring and BRUSH problems the Onan will not start and run at all after releasing the start button. Because the needed AC voltage signal from the Brush/Slip rings is not being generated.
