Compressor Model Refrigerator / Freezers
I thought I'd start a new thread on this subject matter for those that will follow in the future. As I mentioned in another thread I'm planning on installing a compressor model refrigerator and fre...
Forum Discussion
When speaking of current consumption of the Danfosses, we must know at what speed the compressor is being driven at.
My bd35f running at 2000 rpm settles at about 2.7 amps after the compressor first kicks on and wanes to about 2.2 amps a few minutes later. When it had the 270 ohm resistor in the t stat circuit it ran at 2500 rpm and was 3.2 a and 2.7 amps respectively. Their range is 2000 to 3500 rpm.
Amp draw Depends on battery voltage too of course.
My bd35f running at 2000 rpm settles at about 2.7 amps after the compressor first kicks on and wanes to about 2.2 amps a few minutes later. When it had the 270 ohm resistor in the t stat circuit it ran at 2500 rpm and was 3.2 a and 2.7 amps respectively. Their range is 2000 to 3500 rpm.
Amp draw Depends on battery voltage too of course.
