Connection issue with transfer switch
On my last few trips I noticed the AC voltage in the camper was starting to drop compared to the pedestal voltage. After a little bit of searching sure enough some connnections on the transfer switch ...
Forum Discussion
Have read in a Trojan brochure and heard here that you should solder battery lugs. So I'm thinking best practice is to solder all connectors.
In the past I've crimped, then wicked solder in, then shrink wrapped.
But you'll prolly want connectors without insulation or with removable insulation if you solder.
For the right connectors, google, ebay and amazon have worked for me.
In the past I've crimped, then wicked solder in, then shrink wrapped.
But you'll prolly want connectors without insulation or with removable insulation if you solder.
For the right connectors, google, ebay and amazon have worked for me.
