Dexter bearing adjustment procedure
I totally get NOT using the EZlube fitting (ruined some brakes), Timken parts, and annual service. What I don't get is the conflicting methods being used to set the zero backlash on the bearing, i.e....
Forum Discussion
Tapered roller bearings and self adjusting brakes have not changed in in nearly 50 years,.so why all the hype ?
Think what you must, but torqueing a wheel to even 30 lbs, much worse turning it under that much torque, is asking for brg failure.
Turning a wheel under any more than finger tight, removes any and all grease that was applied to the rollers and race in that wheel. The clearance (play) in a bearing it to leave space for grease, not for expansion. But Dexter is God, so do it !
Think what you must, but torqueing a wheel to even 30 lbs, much worse turning it under that much torque, is asking for brg failure.
Turning a wheel under any more than finger tight, removes any and all grease that was applied to the rollers and race in that wheel. The clearance (play) in a bearing it to leave space for grease, not for expansion. But Dexter is God, so do it !
