Dexter bearing adjustment procedure
I totally get NOT using the EZlube fitting (ruined some brakes), Timken parts, and annual service. What I don't get is the conflicting methods being used to set the zero backlash on the bearing, i.e....
Forum Discussion
Muddying this up much? How much pressure do you think is on the bearings when you do a tight turn on the Walmart parking lot, and either the rear or the forward tires have to slide sideways? Alot!!
I wasn't comfortable with 50 ft-lbs, but a little late on that idea (if indeed correct).
I wasn't comfortable with 50 ft-lbs, but a little late on that idea (if indeed correct).
