Did you ground your PD 9200 series converter?
I recently installed a new PD9260C deck mount converter in my fifth wheel. It did not come with anything resembling installation instructions, but it did have this schematic: The converter A...
Forum Discussion
You can download the manual HERE
It shows two grounds - a chassis and a battery negative - and warns that they must be two separate wires.
My new PD4655 has the same setup as did the old Parallax 7500 I was replacing. I used the same wires that went to the Parralax for the PD4655.
They both end up going to the same place but two wires are used.
It shows two grounds - a chassis and a battery negative - and warns that they must be two separate wires.
My new PD4655 has the same setup as did the old Parallax 7500 I was replacing. I used the same wires that went to the Parralax for the PD4655.
They both end up going to the same place but two wires are used.
