Disk Brake Conversion
Just a post to let folks know about my Disk Brakes. I had Performance Braking put this conversion on our 2005 Cougar Fifth Wheel, and a guy named Dennis came to my house and did the install. I'm very...
Forum Discussion
time2roll wrote:camperkilgore wrote:This one?
The one Ron sent me is a very large rectangular shape and about 1 inch by 1 inch by about 3 inches long. I think it is rated for pretty high current. It has an aluminum body with a hole for mounting to the frame.
https://www.etrailer.com/Accessories-and-Parts/Titan/T4846000.html
Hydrastar has similar. https://www.hydrastarusa.com/products/accessories/controller-adapter-module/
By the description these are primarily for OEM brake controllers for the same issue.
That's the one.....the first link. It solved the problem with my setup, even though it is indicated for OEM controllers. My 2003 Dodge Ram 2500 with Prodigy P3 controller had the issue so adding the resistor fixed it.
Again I would like to mention that the problem was promptly addressed by Performance Braking, and I created this thread for the few people that might experience the NC issue after installation.
