full_mosey wrote:
I remeasured today @ Noon.
Optimas = 108F
MS SS10 = 116F, jumpered at 14.4V
Turnigy Volts = 13.85, result of 116F ambient temp comp by SS-10
I will hook up the Turnigy to get the charging Amps and post around 3PM today.
I still maintain that I have never observed any out-gassing from either the Deka or the AGMs. If my AGMs are damaged, won't that be apparent when I run capacity tests next month?
HTH;
John
2PM;
Deployed the Turnigy. There was .30A and 7.75Ap reading. The 0.30A decreased to 0.00A within one minute. That's no, zero, nada mA.
3PM:
One hour readings:
Optimas = 110F
SS10 = 119F
Turnigy = 0.00A, 13.80V, 0.011Ah, 7.75Ap, 0.1Wh
I don't see any danger of outgassing with these readings as there is virtually no power.
For skits and grins, I changed the SS-10 jumper down to 14.1V which resulted in 13.50V, down from 13.80.
HTH;
John
