Does my 6v have a bad internal connection?
These are brand new 6v connected in series. Im cycling them in the garage using a 3.5a light bulb load. I had an RvWhisper batt monitor installed and noticed it was reading super low at 12.05v. ...
Forum Discussion
Should we expect to only see this happen on the negative wire?
I'm measuring amp draw. When I move the positive lead between threaded post and flat section amp draw is the same.
But do that with the negative and amp draw is less when alligator clipped to the negative threads.
I confirmed with 2 different meters.
I'm measuring amp draw. When I move the positive lead between threaded post and flat section amp draw is the same.
But do that with the negative and amp draw is less when alligator clipped to the negative threads.
I confirmed with 2 different meters.
