Does this valve disassemble?
Getting ready for our second trip, this time a bit further than the last, and in going over the coach I found one of the brass valves for the water heater bypass leaking slightly. I did attempt to bac...
Forum Discussion
Having only 1 view I can guess this is typical vanity shut off valve.
Those are made with different technologies and when older valve had compress bushing, some of them can have orings.
The trick to take it apart is to turn the holding nut a bit and then turn the steam a bit. They have to come out together.
Those are made with different technologies and when older valve had compress bushing, some of them can have orings.
The trick to take it apart is to turn the holding nut a bit and then turn the steam a bit. They have to come out together.
