Does this valve disassemble?
Getting ready for our second trip, this time a bit further than the last, and in going over the coach I found one of the brass valves for the water heater bypass leaking slightly. I did attempt to bac...
Forum Discussion
I have not done a thing with this valve, was taken in another direction. Once I arrived back under the vanity area I started on the rewire job for my Atwood water heater as it did not work on AC voltage when we took our trip last October. The heater is new, installed by the dealer due to them overlooking it during winterizing (along with some other water lines and a filter).
After checking all the AC and DC wiring, I discovered no DC current at the relay on the tank which kicks in the AC current for the element. I'm going to post this in another thread but it was a debacle, should have it finished today.
I'll advise how the valve comes out, should be done today between my painting project and the water heater.
After checking all the AC and DC wiring, I discovered no DC current at the relay on the tank which kicks in the AC current for the element. I'm going to post this in another thread but it was a debacle, should have it finished today.
I'll advise how the valve comes out, should be done today between my painting project and the water heater.
