Forum Discussion
enblethen
Aug 11, 2015Nomad
Open the outside access, on the right side is a square or round vertical assembly. On the bottom is where the LP flame is located. About 12-15 inches up there should be a pair of wires coming out that go to the circuit board. These are the wires to the element.
Use a known good 120 volt device such as a light or drill to test outlet.
Use a known good 120 volt device such as a light or drill to test outlet.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,189 PostsLatest Activity: Jan 21, 2025