Chris Bryant wrote:
Thanks for the pic! On your unit the heater is labeled "K", and is run with the light off terminal J2. To disable it, you would access the wire inside the light assembly- there will be 2 wires coming in to the switch, one will be +12 volt hot, the other goes to the heater- disconnect it.
Or, just disconnect the wire from J2 and do without the light, as well.
T H A N K Y O U ! ! I do believe you have just saved me 12 boondocking amp hours per day - a virtual gift when you only have one Group 27 battery!! :)
I can live without the light. But either way, no cutting of wires?